TAPE IS BACK

Vintage Pro & Audiophile Repair, Mods, and Trade / Pro Gear & Parts Sales / Live Recordings / Philosophy

Revox PR99mkIII + Original Console + Stereo Monitor

Fresh off the workbench, this completely rebuilt Revox PR99mkIII sits in its likewise reconditioned original console, connected to the matching Revox stereo monitor unit. The extremely rare ensemble is now offered for sale at a hard-to-beat price.

As with all recorders sold by ReelTape, this Revox PR99 was disassembled into its constituent parts and subsequently rebuilt to exacting standards, using premium new and improved components. All parts subject to wear were replaced. This includes tape lifters, tension guides, and bearings. Deteriorated or cosmetically degraded parts such as bolts and push buttons were also replaced.

As a matter of course all feisty Rifa paper capacitors, prone to popping, have been swapped as have the infamous Frika electrolytic capacitors which tend to drift in value over time as their dielectric material degrades. In fact all electrolytical capacitors were substituted from the reservoir caps in the power supply to the line amplifier modules and everything in between. The open trimmers (potentiometers) that often cause cracking and noise have all been replaced with superior sealed Piher and Bourns trimmers.

Mechanics

Mechanically, this PR99 was also upgraded and readjusted. The switchboard that houses all controls was taken out, disassembled. Contact points of the sliding, rotary, and toggle switches were thoroughly cleaned with a stiff fibre brush and light sandpaper before receiving a light coating of D5 contact cleaner. The same treatment was meted out to the potentiometers which now have a crack-free and silky-smooth feel to them. The plastic levers of the toggle switches (that easily break) were replaced with sturdy new metal levers.

The tensions of the brake system was readjusted to factory specification by replacing the coil springs and cleaning both the brake bands and linings. Over time, the brake system loses its effectiveness. A new high-quality pinch roller, procured from Heroms, was installed and its pressure carefully set to minimise wow&flutter.

Fast winding was restored by installing new motor capacitors. The reel motors also received New SKF bearings. The bearing of left-hand side tape guide was replaced whilst the fixed right-hand side tape guide was taken out and substituted with an SKF bearing, improving tape handling.

Both reel plates were sent to Switzerland for fresh coats of Nextel paint. This involves a chemical process not unlike alchemy that must be performed within a narrow temperature range and is not something to be undertaken by a regular paint shop. Moreover, Nextel paint is prohibitively expensive but does allow for a suede-like texture.

Finishing Touches

The three heads were carefully relapped by Summertone in England, Europe’s foremost tape head relapping specialist. Upon their return, the record and playback heads feature an inexistent wear pattern and are good for many thousands of hours of optimum performance.

Alignment produced the expected outstanding results with performance on all critical parameters exceeding the manufacturer’s original specifications by a considerable margin. Please see the chart below. Frequency response was flat to within +/- 1dB from 31.5Hz to 24kHz.

Console and Stereo Monitor

The console was disassembled and its metal parts entrusted to a professional spray paint business where it received new coats of Revox-grey. A set of brand-new caster wheels with foor brakes was fitted. The six plastic end-plugs, usually missing or severely scratched, were replaced as well

The original stereo monitor unit, containing two 10W power amplifiers, received new electrolytic capacitors and was carefully cleaned.

Details make the difference: the recorder and its monitor unit are fastened to the console with countersunk washers and hex bolts for a perfect finish.

The Pitch

After its full restoration, this Revox PR99mkIII may be counted amongst the best of its kind in the world. For all intents and purposes this beautiful machine functions and look like new. ReelTape takes pride in its work and is in the business of rebuilding and selling pristine machines in their original condition; not in quickly moving ‘flipped’ recorders. Any reel-to-reel recorder leaving the ReelTape shop comfortable exceeds its manufacturer’s specifications. Moreover, these recorders look and feel like brand-new.

Please see ‘Recorder Immaculate‘ for the reasons why the Revox PR99 is, in ReelTape’s opinion, one of the most underrated R2R machines available. These recorders are built to last not just a lifetime but multiple generations. They have been designed for ease of serviceability with new parts widely available at reasonable prices.